This machine has a 18TC Fanuc control. The machine has been down for a few years and a customer asked me to get it going. The turret motor and drive have been removed. I powered the machine up anyway and was able to move X,Z, and C axis but I had to keep hitting the standby button to keep the servos on.
Anyway, the schematics show that the turret motor and drive are actually mitsubishi components which I thought was strange since the control is Fanuc. The drive is a MR-J2-100A-S01 and the motor is HC-SF81. I will have to buy the amp and motor and then get the turret zeroed and I was wondering if you can control the turret with the handle and if so, how? I do know hw to use FdHold and SpStop to unclamp turret.
Also, I am in North Carolina. Who is the closest dealer for Hyundai-Kia.