[warhippie]

Howdy all
Im having trouble with trying to get the G150 program to run on my machine. What is funny is that when I write the program from the manual it doesnt like it either.

Attached is a copy of my drawing and the programs I have written.
The tools to be used are as follows
T10 (33/64 drill)
T28 (1/2" 2 flute end mill)
Thanks
Dave
%
O02006 (SPIDER BLOCK WEIGHT REDUCTION)

N1 T10 M06
N2 G00 G90 G121 X1. Y2.
N3 S1500 M03
N4 G43 H10 Z1. M08
N5 G83 G98 Z-1.125 Q0.05 R0.1 F8.
N6 G00 G80 Z1. M09
N8 G28 G91 Z0 M05

N9 T28 M06
N10 G90 G121 G00 X1. Y2.
N11 S2000 M03
N12 G43 H28 Z1. M08
N13 G01 Z0.01 F30.
N14 G150 X1. Y2. Z-1.125 G41 J0.25 K0.02 Q0.5675 R0.01 P2007 D28 F16.5
N15 G40 G01 X1. Y2.
N16 G00 Z1. M09
N17 G28 G91 Z0 M05
N18 G28 G91 Y0
N19 M30



%
O02007 (G150 POCKET GEOMETRY)
N1 G01 X0.375
Y0.375 F16.
N3 X4.125
N4 Y1.115
N5 X2.355
N6 G03 X2.105 Y1.365 R0.25
N7 G01 Y2.26
N8 G03 X2.355 Y2.885 R0.25
N9 G01 X4.125
N10 Y3.625
N11 X0.375
N12 Y2.
N13 M99
%

[txcncman]

What error messages are shown?