584,833 active members*
5,543 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > EdgeCam > milltronics post
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2009
    Posts
    20

    milltronics post

    I am looking for an Edgecam post for a Milltronics VMC. We have a few VMC's and I've never got a good post out of Edgecam support. We are operating on a generic fanuc post. Its needs to be for a Centurion 6 or 7 control. Moving to more 3d machining we need a better post. If anyone could help it would be great. Thanks

  2. #2
    Join Date
    Jun 2008
    Posts
    125
    Personally never seen a Milltronics machine before so had to download the programming manual of t'internet.
    All the G & M codes look like standard fanuc but some of the extra inputs look a little different (drilling cycles for example, may need format table letter address tweaks).
    Use the Adaptive-Iso template to start with and take it from there. If you need any more help then PM me and I'll give you my email address so you can mail me what you've got and I'll help you out. As long as you're on Edgecam version 2010R1, or newer, that is.

Similar Threads

  1. post processing for milltronics ?
    By ihbuilder in forum Visual Mill
    Replies: 7
    Last Post: 09-16-2011, 11:43 AM
  2. POST FOR MILLTRONICS
    By Chizel in forum Milltronics
    Replies: 1
    Last Post: 05-04-2010, 04:54 PM
  3. mc post for a milltronics w/centureon 7
    By machinist77 in forum Milltronics
    Replies: 5
    Last Post: 04-30-2008, 02:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •