I just noticed, after 20+ years of using Mastercam, that it is using nearly all of my processor even when I'm not doing anything on it. I have MC9.1 open in a window with some geometry displayed but I'm not using it at the moment but it still shows it's using all of the available cpu.
Can someone 'splain why?
TIA
JohnF
Thread: 99% cpu use
Results 1 to 3 of 3
-
08-25-2011, 07:44 PM #1
Member
- Join Date
- Nov 2004
- Posts
- 83
99% cpu use
-
08-28-2011, 01:52 AM #2
Registered
- Join Date
- Jul 2003
- Posts
- 263
MC9 is a resource hog. it will do that the X versions does not do that
If you can ENVISION it I can make it
-
08-28-2011, 11:29 PM #3
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
in V9 this is known. now open mastercam V9 and the task manger so you can see how much of the CPU is used and open any window like ops manger or levels and watch it drop.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Reply With Quote
Posting Permissions
