509,911 active members
2,838 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Colchester Tornado lathes > Parameters for Colchester Tornado 100
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Jan 2009
    Posts
    1

    Smile Parameters for Colchester Tornado 100

    Hi All,
    I have a Colchester Tornado 100 and we seems to have deleted all the parameters. Does anyone have a list of the standard Parameters so we can enter them all back in, i know the back up battery is ok so i think its a operator error that did this, i did used to have them but i have mis placed them, can anyone help out ?
    Hope to hear from you

  2. #2
    Registered
    Join Date
    Apr 2010
    Posts
    44
    yes i can get you the parameters you will also need the diagnostics

  3. #3
    Registered
    Join Date
    Mar 2013
    Posts
    9
    I also have the same problem. Machine was bought on a whim,after installation no Parameters even the Battery was dead. Might have been in storage for some time.

Similar Threads

  1. Colchester Tornado 220M
    By Turnalot in forum Colchester Tornado lathes
    Replies: 8
    Last Post: 07-23-2015, 09:18 PM
  2. Colchester Tornado A200
    By Grimreaper831 in forum Colchester Tornado lathes
    Replies: 1
    Last Post: 06-28-2011, 08:35 AM
  3. Colchester Tornado Fanuc 21i-t
    By Stebedeff in forum Fanuc
    Replies: 2
    Last Post: 11-08-2010, 02:43 AM
  4. Colchester Tornado 200 Door Release
    By rrbmachining in forum Colchester Tornado lathes
    Replies: 5
    Last Post: 06-24-2008, 01:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •