584,830 active members*
5,561 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > CNC Machine Related Electronics > G&L power supply for 8000B NT Controller
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2009
    Posts
    5

    G&L power supply for 8000B NT Controller

    We have lost our power supply for our G&L 8000B controller. The OEM power supply is a Powertech P/T-6235DN3N. It looks as if the power supply has been modified by G&L.
    The prints show four connections from the power supply. The Mother Board,
    the CD Rom, Hard Drive, and the Floppy. Our power supply has a 6 pin Molex
    connector that only uses 3 of the pins. there is a 20ga white,blue,and brown
    wires attached to the connector. This connector plugs into a board that is plugged into the mother board vertically. The connection on the board is not labeled.
    G&L has not been able to help me,as they do not support the NT operating systems any more. The power supply even has the machine controller S/N#
    455-0044 and still could not help.
    What are these wires for or what do they do,voltage etc. I do know that it is a ATX power supply and have a new one as I type. Help Please.

  2. #2
    Join Date
    Sep 2010
    Posts
    1765
    since no takers i will comment.....

    we r g&l disty; it is our experience that g&l does not 'no longer support' anything... they may not have a replacement old part anymore, but ussually can rpr it or at least give u the wiring info u need to get something else.

    that said, i wud be happy next tues to look into this for u if u can wait? post more info, pictures of the stuff to help identify it.

Similar Threads

  1. Spectralight isa card and power supply/controller
    By thx1138 in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 05-13-2012, 05:06 PM
  2. controller power supply 115/230v OK for Australian power?
    By Momill in forum Australia, New Zealand Club House
    Replies: 8
    Last Post: 07-07-2011, 05:06 PM
  3. Replies: 0
    Last Post: 05-06-2009, 03:56 PM
  4. DIY Controller Board Power Supply
    By Fish4Fun in forum Open Source Controller Boards
    Replies: 5
    Last Post: 03-29-2007, 09:43 PM
  5. Controller and Power Supply Recommendations
    By awilcox in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 04-11-2006, 06:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •