[canyon289]

Hey,
So I decided to learn Gibbscam over Mastercam and I had a quick question.

After I select a tool and operation and click "do it" and it creates the tool path, how do I update the toolpath if I have to change the tool? Does it do it automatically or do I have go go through one by one?

[Species8472]

There's a "Do It" and "Redo" button. You are looking to "Redo" it.

[canyon289]

Thank you, as usual it was some simple solution that I missed.

I have one more question and I don't want to clutter the forum.

I'm "machining" a 1 inch plate and I want the contour to go to a Z depth of -1.1 inches so the tool machines through the plate, but the gibbs can won't let me do it.

It will let me with -1 but not -1.1. I've checked the work envelope and it's ranges from z0 to z-2.

If you need the file please let me know and I'll upload it.

[GCMAN]

It would be much easier if you would upload your file. Please include what version of Gibbs you are running.

GC

[canyon289]

GCMan

I apologize I'll do that next time. As it turns out I have a question for lathe now anyway.

Thank you for all the help. Learning on my own is difficult and I appreciate all support I can get.