584,829 active members*
5,057 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > CNC Machine Related Electronics > Prolight 3000 turning center C-axis driver failure
Results 1 to 1 of 1
  1. #1
    Join Date
    Sep 2011
    Posts
    0

    Prolight 3000 turning center C-axis driver failure

    I've encountered a problem with my Prolight 3000 turning center. I was learning how to use the machine by cutting a few tapered spacers when the machine buried the bit resulting in a stall. I cleared the machine and then the tool turret started acting erratically. It's very jerky as it rotates and it won't home correctly. I've been told by the factory that the driver is burned out and that they need to replace it. Is this something that I can fix by replacing a chip or is it much more complicated?
    Thanks.
    Attached Thumbnails Attached Thumbnails Prolight 3000 PCB.jpg  

Similar Threads

  1. proLIGHT 1000 Machining Center problem
    By Sethman in forum Commercial CNC Wood Routers
    Replies: 2
    Last Post: 12-27-2011, 10:57 AM
  2. Prolight 3000 tool turret problem
    By Robert440 in forum Benchtop Machines
    Replies: 22
    Last Post: 09-10-2011, 03:00 PM
  3. Replies: 0
    Last Post: 12-24-2010, 12:09 PM
  4. Emcotronic driver board failure
    By Adee in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 05-13-2008, 05:42 PM
  5. Turning Center G40 G41 and G42
    By jorgehrr in forum G-Code Programing
    Replies: 16
    Last Post: 04-14-2007, 04:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •