Hi!
From time to time we have heavy workpiece put on the table.
In shop we have a chain hoist on a portal.
Is there a chance to mod the housing and open the top side of the 4020 to put
the pieces with the crane into the machine?
Thomas
Thread: topless 4020HT
Results 1 to 6 of 6
-
09-16-2011, 07:32 AM #1
Registered
- Join Date
- Nov 2007
- Posts
- 78
topless 4020HT
-
09-16-2011, 05:13 PM #2
Registered
- Join Date
- Jul 2009
- Posts
- 317
Remove the bolts and replace the top with a bar to hold the side panels.(left side only. right side is the hardness inside rail)
-
09-16-2011, 05:40 PM #3
Gold Member
- Join Date
- Jan 2006
- Posts
- 2985
you could also consider a "C" shaped fixture to reach around the lid.
Matt
-
09-17-2011, 02:51 PM #4
Registered
- Join Date
- Nov 2007
- Posts
- 78
Problem is the high of the hoist.
So the hook with workpiece have to come from the front.
-
09-17-2011, 07:55 PM #5
Registered
- Join Date
- Mar 2003
- Posts
- 900
There was an option for that style of sheet metal for a chain hoist. Talk to Doug H. at Maintenance Technologies and see if it is still available.
Neal
-
09-19-2011, 10:48 AM #6
Registered
- Join Date
- Nov 2007
- Posts
- 78
Hi!
Originally Posted by Neal
Seem's it isn't available here.
btw: I'm from germany
Thomas
Reply With QuoteSimilar Threads
-
4020HT metric or not?
By thomasz in forum FadalReplies: 12Last Post: 08-06-2011, 03:16 PM -
4020HT - question
By MBX5 in forum FadalReplies: 6Last Post: 08-20-2010, 06:17 PM -
1995 4020HT lube?
By MBX5 in forum FadalReplies: 6Last Post: 04-08-2010, 02:35 AM -
Fadal 4020HT arcing
By sullione in forum FadalReplies: 2Last Post: 07-27-2009, 04:03 PM -
Looking for a use 4020HT with rigid tap
By REVCAM_Bob in forum FadalReplies: 0Last Post: 05-13-2006, 07:50 PM
Posting Permissions
