I want to lock the tool pocket to a specific tool no so if a operator takes a tool out offline he knows where to return it. I have a job set to start that will use replacement tools to be set offline and want to reduce confusion.
The manual states 7267.0 through .3 is for the tool pockets but I have an option of 0 through 5 for each. Does anyone know which is the correct parameter?
Manual reads as follows;
MP7267.0 Tool Number - :0 to 5
MP7267.1 Special Tool - :0 to 5
MP7267.2 Fixed Pocket -:0 to 5, I think this is the one, it is set to 3 now.
MP7267.3 Pocket Locked-:0 to 5