585,589 active members*
2,810 visitors online*
Register for free
Login

Thread: Fanuc OM Drip Feed

Results 1 to 2 of 2
  1. 09-26-2011, 03:29 AM #1
    danSN
    danSN is offline Registered
    Join Date
    Jan 2006
    Posts
    8

    Fanuc OM Drip Feed

    Hi,

    I have a CNC LC-CV305 First-Taiwan, mill with a Fanuc OM-B control, no tape switch, no ladder diagram available or accessible. I have a few spare inputs wires in the cabinet, but no electrical available. I contact the mfg but no luck.

    Due to the above I can't turn the G127.5 ON so no drip feed.

    For now I split the files, but this is a pain.

    Thank you,

    Dan
    Reply With Quote Reply With Quote
  2. 01-03-2012, 03:45 AM #2
    kustomwerkz
    kustomwerkz is offline Registered
    Join Date
    Dec 2011
    Posts
    0
    Bump this up I have the same issues on a Fanuc TapeMate from 1990 .........
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. WSC-6 fanuc 0T-B Drip Feed
    By dexta in forum CNC Machining Centers
    Replies: 1
    Last Post: 02-27-2011, 09:20 AM
  2. Drip feed for Fanuc 0-MF
    By giorgis in forum Fanuc
    Replies: 4
    Last Post: 05-08-2009, 04:44 PM
  3. Fanuc 6mb drip feed
    By cowleym in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 03-18-2008, 11:25 PM
  4. Drip Feed - DNC - Fanuc 16i
    By gm3211 in forum DNC Problems and Solutions
    Replies: 2
    Last Post: 09-21-2007, 08:43 PM
  5. Drip Feed Fanuc 18i
    By MoldMaker in forum Fadal
    Replies: 0
    Last Post: 12-26-2006, 05:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules