[jetski]

I have a Roboform 400 with 128 amps and a c axis. Use to have a tool changer. I am needing schematics for this machine! I have a bad relay or something showing up like a short from the head to the table. My c axis has either a bad cable or an encoder head and has no idea where it is at or where home is at. I need a schematic so bad I can taste it. Before you ask Charmille says they dont have them. They will send down a board swapper to fix the problem. Before I do that I want to know what the problem is and just have them send me the bad board or me replace the component that is bad. 317-408-2684 cell or pm me. HELP HELP HELP!

[jetski]

Come on... Someone has to be able to track down a schematic for a Charmilles? I have a big non working expensive room divider here if I can not get it to run! I have a big boat but don't need an anchor this big?

[bjay]

Jetski

Here are some pics ,Dont know if its any use to you looks to be in russian

Bernie

Charmilles Roboform 400 | MachineParts.ru

Edit ; Just thought about this forum might be something

http://www.edmcorner.com/