[KHOATRANNGOC]

HI.
I have a machine OKK Fanuc OM it is alarm operator message No.2006.
I'm auto run about 1-2 minute is alarm but it only alarm to light the lamp led, It not alarm on the screen display but it only operation mode handle ok, mode auto is no ok.
I don't now to repair, Can you help me?

Thanks

[gdgrinder]

HI.
I have a machine OKK Fanuc OM it is alarm operator message No.2006.
I'm auto run about 1-2 minute is alarm but it only alarm to light the lamp led, It not alarm on the screen display but it only operation mode handle ok, mode auto is no ok.
I don't now to repair, Can you help me?

Thanks

I think you need to ask your supplier about the problem, they should know the problem. Hope you will slove the problem soon.

Best wishes for you.

Nina

[KHOATRANNGOC]

Hi
I check all Turret Clamp, Lubrication oil level, Lubrication Level Flow Switch, ATC position and all sensor ok
It can't auto run and the Zero return, it only alarm the light led, It not alarm on the screen display but it only operation mode handle for 3 axis X,Y, Z ok, mode auto is no ok.
Sometimes it auto run 1-2 minute ok after it alarm but I no operation 1-2 minute it still alarm( turn on the machine free 1-2 minute it alarm)
Thanks

[OKK Rey]

What model OKK is it? You mentioned the control type but what is the machine model?

[KHOATRANNGOC]

What model OKK is it? You mentioned the control type but what is the machine model?

Hi
I need your help about list alarm over No.1000
OKK Fanuc OM: Model No PCV40, JOB No MA46012, MFG DATE 1989,
MACH No 1112, Osaka Kiko Co.,LTD

Thanks