WE HAVE A MITSUBISHI FA 10 WIRE EDM.
I KEEPING GETTING THIS ALARM WHEN IT CUT THE WIRE. 830 CUT WIRE REMAINING. I CAN HIT START AND IT WILL FEED AND TAKE OFF RUNNING TILL IT CUTS THE WIRE AGAIN. I HAVED CLEANED THE MACHINE TWICE. I HAVE LOCKED EVER WHERE I COULD THINK THERE MIGHT BE A PEICE OF WIRE CANT SEE ANYTHING. MY GUESS IS A SENSOR SOME WHERE. ANY IDEA?
Thread: FA10 WIRE EDM
Results 1 to 1 of 1
-
09-29-2011, 07:49 PM #1
Registered
- Join Date
- May 2011
- Posts
- 29
FA10 WIRE EDM
Reply With QuoteSimilar Threads
-
Mitsubishi wire type setting for zinc coated wire
By Futurewire in forum EDM Discussion General TopicsReplies: 1Last Post: 01-26-2011, 10:47 AM -
Mitsubishi wire type setting for zinc coated wire
By Futurewire in forum EDM Discussion General TopicsReplies: 2Last Post: 01-25-2011, 01:49 PM -
Running stepper motor wire with router wire?
By basskitcase in forum DIY CNC Router Table MachinesReplies: 2Last Post: 02-19-2010, 05:18 PM -
power supply size? for multi wire (total 250 inches of wire)
By DanOSB in forum CNC Wire Foam Cutter MachinesReplies: 5Last Post: 03-02-2009, 11:34 PM -
How to wire an 8 wire stepper motor
By technosteve in forum DIY CNC Router Table MachinesReplies: 1Last Post: 01-17-2009, 12:01 AM
Posting Permissions
