We purchased an EP10-150 which orginally had a Cybelec Controller, and was converted to a Race Controller. This is an 8 axis machine. 6 back guage and two cylinder. The Race Controller hard drive is gone, and we have no software for the machine. We bought this machine as is, knowing this was not working, and would like to know what would be a good option for a controller and software for this machine. We have checked into Fasfold controllers and would like to know if they are a good option. Would there also be a way to get a hard drive and software for the Race Controller.
Thanks,
Thread: AFM Press Brake Controller
Results 1 to 2 of 2
-
10-03-2011, 04:24 PM #1
Registered
- Join Date
- Oct 2011
- Posts
- 0
AFM Press Brake Controller
-
02-19-2013, 05:56 AM #2
- Join Date
- Jan 2013
- Posts
- 0
retrofit
did you ever go with the fasfold? we are looking to do a cincinatti 8 axis.
Reply With QuoteSimilar Threads
-
Amada Press Brake Controller problem
By jamesbond007 in forum Bending, Forging, Extrusion...Replies: 4Last Post: 12-29-2018, 03:38 AM -
Looking to buy Used Press Brake
By magma-joe in forum Bending, Forging, Extrusion...Replies: 5Last Post: 01-16-2012, 09:05 PM -
Amada brake press controller nc9 r
By maplesiport in forum Controller & Computer SolutionsReplies: 0Last Post: 07-15-2010, 11:32 PM -
Selecting Press for home shop press brake
By tikka308 in forum Bending, Forging, Extrusion...Replies: 0Last Post: 12-29-2009, 05:51 AM -
NorthStar Press Brake For 20 Ton Shop Press anyone ever use one?
By dsmdude in forum Bending, Forging, Extrusion...Replies: 6Last Post: 04-13-2007, 10:01 PM
Posting Permissions
