Can Mach 3 perform a "While" command?
Can Mach 3 perform a "While" command?
Not directly in g-code, but you can put it in an M code macro and call the M code from your gcode.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)