Hello everybody,
We have a problem with HMC 400, the problem begins when we change of place and was left without power, and shows a error says 'CMOS checksum error-defaluts loades CMOS battery fail', we change the battery and the error disappeared, but now wen try to load main code now appears Illegal Op code in object file.
Does someone knows the CMOs configurations for the MMI and MAIN cpu's or someone has the HMC 400 Technical Handbook?
Best Regards
Thread: Helitronic Power HMC 400
Results 1 to 2 of 2
-
10-04-2011, 12:41 AM #1
Registered
- Join Date
- Sep 2009
- Posts
- 7
Helitronic Power HMC 400
-
10-04-2011, 10:35 PM #2
Registered
- Join Date
- Jan 2007
- Posts
- 103
cmos
it appears you have lost some settings with the battery/power loss.
you will have to call to United grinding and ask for the instructions to reload the settings.
you can find the contact info at Grinding.com: Your #1 Source for CNC Grinding Solutions - Grinding.com
Good luck!
Reply With QuoteSimilar Threads
-
controller power supply 115/230v OK for Australian power?
By Momill in forum Australia, New Zealand Club HouseReplies: 8Last Post: 07-07-2011, 05:06 PM -
Helitronic 45 with HMC300
By 94suptt in forum Toolgrinding / Toolgrinding MachinesReplies: 2Last Post: 10-25-2010, 09:17 AM -
I think I want to power my mill through a power strip or surge protector, good idea?
By slashmaster in forum Benchtop MachinesReplies: 5Last Post: 10-13-2010, 03:28 PM -
More power from switching power supply
By R.thayer in forum CNC Machine Related ElectronicsReplies: 4Last Post: 03-11-2007, 02:03 AM
Posting Permissions
