my motor number is A06B-0127-B077
I got offer for A06B-0127-B577
could someone explain me the diffrence
and the last 4 number what it mean
my motor number is A06B-0127-B077
I got offer for A06B-0127-B577
could someone explain me the diffrence
and the last 4 number what it mean
Same motor/encoder except B577 has taper shaft.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Actually, with this particular motor, the standard shaft is taper. Here is the decoding for this one. It does not apply to all FANUC alpha servo motors.
A06B-0127-Bxyy
X : 0 (taper shaft -- standard)
X : 1 (tapers shaft with brake)
X : 5 (straight shaft)
X : 6 (straight shaft with brake)
YY: 75 (pulse coder alpha A64)
YY: 77 (pulse coder alpha I64)
YY: 88 (pulse coder alpha A 1000)
Note: There is often a suffix after the the -Bxyy which can call for straight shaft with key, IP67, special bearings, etc. Too many to list.
thank you very much for the help