Hello
What material and thickness you can cut with 1000W Co2 laser machine?
Hello
What material and thickness you can cut with 1000W Co2 laser machine?
I would like to see a 1000w CO2 laser. I can't imagine the tube size on that. I'd imagine it could cut some metals, and pretty much anything else you put under it.
My view is the same as bpoulin,I also want to see this product, our products are many kinds, I consulted other colleagues, they have never seen 1000W product,I think this machine must be unique in the world.
http://www.morntech.com/: Laser engraving machine , CNC router
Plenty 1kw+ Co2 lasers around, its a little "weak" for the metal cutting industry where 3kw is "normal"
I have heard of 3kw lasers for cutting metal. These obviously can't be glass tube lasers. I see how big a 100w glass tube laser is, compared to a 60w. Now I'm imagining that size multiplied up to 1000 or 3000w. So Honestly I would like to see what they are using. I have heard of them this size but I haven't seen them. Then again I've only been into lasers for about year now.
No , they dont use cheap chinese glass tubes that are 15 meters long
Google rofin sinar, trumpf or 3kw co2 laser to see examples of what they use.
http://www.morntech.com/: Laser engraving machine , CNC router
I was NOT talking about your lasers but about 1000w CO2 lasers...not sure how you interpreted what I had to say as anything to do with MORN!!!
I was at Shenhui in Liaocheng City in May this year , not sure if they iare still making your machine , but if they are it's going to better than some other brands I have seen. I bought a few machines from them and was happy.
We have a 2800W and a 6000W lasers with glass tubes