We have in our VMC15 TS27 probe that was hang on the side
We tried to work with it
But when nothing touch the probe it said on the screen that is touching
When we push it not touching it seem that it have to be another way
I test it with UT and it failure
But if i do for the first time push and then relish it O.K.
What i need to do to change it
Thread: renishaw TS27
Results 1 to 5 of 5
-
10-11-2011, 08:53 PM #1
Registered
- Join Date
- Apr 2005
- Posts
- 108
renishaw TS27
-
10-11-2011, 11:10 PM #2
Registered
- Join Date
- Jul 2009
- Posts
- 317
test:UT(enter), #3, press Start while depprsing the probe sensor,release the probe and press start, wait for the Pass or Fail.
-
10-13-2011, 09:05 AM #3
Registered
- Join Date
- Apr 2005
- Posts
- 108
I done UT if I done exactly the way is fail
If I do opposite it O.K.,
-
10-13-2011, 05:28 PM #4
Registered
- Join Date
- Jul 2009
- Posts
- 317
Check connections at motherboard.
-
10-18-2011, 05:26 PM #5
Registered
- Join Date
- Mar 2003
- Posts
- 900
If you have the M12 interface box, the input and output wire could be reversed.
Neal
Reply With QuoteSimilar Threads
-
Renishaw MP3
By GrahamIT in forum Calibration / MeasurementReplies: 0Last Post: 12-26-2010, 10:38 PM -
Renishaw MP 700
By luke1626 in forum FanucReplies: 0Last Post: 03-24-2010, 12:19 AM -
TS27 tool breakage alarm text message
By Scanfab in forum FadalReplies: 3Last Post: 03-26-2009, 03:36 PM -
Renishaw OTS
By rbest27 in forum Haas MillsReplies: 1Last Post: 05-07-2008, 08:17 PM -
Renishaw CP1
By Dancy in forum Calibration / MeasurementReplies: 0Last Post: 01-18-2008, 04:57 PM
Posting Permissions
