Hey folks this is driving me nuts. Im pretty sure there is a fault with the machine but really need some guidance to get there.
Machine is new, 8 tool atc linear layout.
Im loading the Z tool offset for tool 2 into the tool offset page and tool 2 still keeps going to the same spot. (im not even trying tools 3-8)
If im silly and put 200000 into the tool 2 offset it goes to the same spot, if I put 20000, I get the same result and even with the number 2.
The physical length difference between tool 1 and tool 2 is 11.6mm (tool 2 is shorter).
This is the page with that being reflected (have I missed something)
Results 1 to 2 of 2
-
10-14-2011, 10:51 AM #1
Registered
- Join Date
- Dec 2006
- Posts
- 96
Who has syntec controller running there chinese atc
-
10-22-2011, 02:47 PM #2
Registered
- Join Date
- Dec 2006
- Posts
- 96
A week with no reply's.
Luckily Ive managed to work it all out. Most confusing software in exsisitence
Reply With QuoteSimilar Threads
-
Excitech CNC - Syntec Controller Users
By BC-CNC in forum Chinese MachinesReplies: 293Last Post: 01-11-2020, 10:38 AM -
Syntec Controller and Network Access
By nash in forum Chinese MachinesReplies: 16Last Post: 11-14-2019, 10:35 AM -
How/Where to change Syntec interface from Chinese to English??"
By rvholiv in forum Excitech routersReplies: 4Last Post: 10-29-2013, 02:23 PM
Posting Permissions
