Hi all.
I have gotten myself a STAR KNC-32 II with Fanuc 16-TB.
When I first powered it up there were a few unimportant alarms, which I have all sorted out, no worries. But one morning I come in it won't power up the control.
On the main CPU board (A16B-3200-0110) I get Status Alarm "The system is stopped before the CPU is activated" and on the Option 2 board (additional axes) I get Status Alarm "Servo alarm occurred in additional axes"
I have checked all cables to the servos of the additional axes X2, Z2, and B1 and none have faults. I'm not able to find a Polygon servo so I'm guessing this machine is not equipped with one.
Since the control wont power up I can not look through diagnostics at all.
Any ideas how to find this error?
Thanks all,
Lene!