Hi all,

Major problem as you see. No parameters and no back-up in house. The machine is an auction buy, about 21-22 years old.

The communications were trying to be set up and when I started machine in morning alarm 101 P/S was active.

I have no alarm manual, but found out that this is for power interrupt during memory write(?)

Was told to press "delete" + "reset' during power up to clear...now 2 more alarms #417 and #427 which represent 'x' and 'z' axis DGTL PARAM.

Now have no parameters and can't move machine or do anything. This is for main spindle only....right side sub spindle appears okay.

If anyone has parameters and/or alarms manual I would greatly appreciate any and all help.

Parameter hard copy are also missing from machine.

Thanks in advance for your help, I'll keep you posted.