Hoping some1 could explain why I'm receiving this error in Mach 3. It happens when running G code and get to the "M3 S24000" line. Spindle don't turn on and I get that error.
Thanks,
Dan
Hoping some1 could explain why I'm receiving this error in Mach 3. It happens when running G code and get to the "M3 S24000" line. Spindle don't turn on and I get that error.
Thanks,
Dan
Thanks Walky, but I made and error on post unfortunately the code was correct, I just edited it.
Thanks again,
Dan
Open M3.m1s and see what's in it?
But, first, try closing Mach3, and rebooting Windows and see if it fixes the problem.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
The reboot fixed it, thanks Ger.
Dan