585,974 active members*
4,523 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > CNC88 - Trouble loading program to memory

Thread: CNC88 - Trouble loading program to memory

Results 1 to 2 of 2
  1. 10-25-2011, 04:21 PM #1
    mbam
    mbam is offline Registered
    Join Date
    Oct 2003
    Posts
    128

    CNC88 - Trouble loading program to memory

    I have a 3016 with a CNC88 control. I cannot get a somewhat large (about 200K) program to load.

    I can view it from the disk on the control no problem, but if I hit disk-to-memory the drive will go active for a few seconds, then nothing. I have deleted all the programs that were there and a memory check show over 400K free.

    Any ideas?

    Thanks!
    Thanks
    Marc
    Reply With Quote Reply With Quote
  2. 10-25-2011, 05:20 PM #2
    carbidecraters
    carbidecraters is offline Registered
    Join Date
    Apr 2005
    Posts
    1194
    Have you gotten anything else to load? If not then your doing something wrong. Do you get any errors?
    We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts If you have a broken down Fadal give a shout.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Need help loading program from usb
    By hankster in forum Haas Mills
    Replies: 2
    Last Post: 07-29-2009, 11:08 PM
  2. New to EMC2, New to Linux Trouble loading SIM files
    By CalG in forum LinuxCNC (formerly EMC2)
    Replies: 31
    Last Post: 03-22-2009, 01:25 PM
  3. Having trouble loading program using Mastercam"s Cimcov5 in my Haas
    By Robert Timby in forum Mastercam
    Replies: 3
    Last Post: 01-20-2008, 12:25 AM
  4. G10 Trouble On A Fadal Cnc88
    By 321HARVEY GISSE in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 12-28-2006, 04:34 PM
  5. up loading a cnc program
    By fjd in forum Mazak, Mitsubishi, Mazatrol
    Replies: 14
    Last Post: 11-06-2003, 12:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules