509,629 active members
3,239 visitors online
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Registered
    Join Date
    Oct 2008
    Posts
    23

    CNC4PC C11 BOB

    Hi

    I have start to gather up my bits and pieces to my next project. Converting an G0704 to a CNC mill. I bought quite a few items from kelinginc.net. some servos etc... One thing that I bought that I am a little confused is the C11 BOB and the C22 interface board for a pendant. How do these boards interface or do they? Is the C22 interface required? As well does any one have a block diagram on the C11 and it relationship with the servo controllers etc.
    Brent

  2. #2
    Moderator
    Join Date
    Dec 2005
    Posts
    519
    They don't interface with each other. You'll need two parallel ports. One for the connection between the computer and the C11, and one for the C22 interface.

    Mark

  3. #3
    Registered
    Join Date
    Oct 2008
    Posts
    23
    Quote Originally Posted by wendtmk View Post
    They don't interface with each other. You'll need two parallel ports. One for the connection between the computer and the C11, and one for the C22 interface.

    Mark
    Thanks Mark
    I am order another parallel port now.
    Brent

  4. #4
    Moderator
    Join Date
    Dec 2005
    Posts
    519
    Brent,

    You're very much welcome. I use both those items on my machine. Are you running EMC2 or Mach?

    Mark

  5. #5
    Registered
    Join Date
    Oct 2008
    Posts
    23
    Quote Originally Posted by wendtmk View Post
    Brent,

    You're very much welcome. I use both those items on my machine. Are you running EMC2 or Mach?

    Mark
    I am planning on Mach as I have had it on previous machine. Are you running steppers or servos?

  6. #6
    Moderator
    Join Date
    Dec 2005
    Posts
    519
    Currently running steppers, but I may upgrade to servos in the future.

    Mark

Similar Threads

  1. Help with cnc4pc C11 BOB
    By AVP in forum Controller Cards
    Replies: 0
    Last Post: 03-15-2010, 01:10 AM
  2. cnc4pc and vfd
    By doc0302 in forum Phase Converters
    Replies: 1
    Last Post: 11-26-2009, 01:54 AM
  3. cnc4pc C6 card and vdf
    By hudmut in forum Benchtop Machines
    Replies: 2
    Last Post: 10-02-2009, 03:47 PM
  4. CNC4PC Boards
    By tz1238 in forum General CNC Machine Related Electronics
    Replies: 2
    Last Post: 11-03-2007, 05:55 AM
  5. Xylotex and cnc4pc
    By Eclipse in forum Xylotex
    Replies: 7
    Last Post: 12-22-2005, 05:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •