If you can help me I using cabinet vision and unfortunately
I don’t have support from planit
When my cnc router cut sometime cutting bit don’t cut everything up to bottom
How I can adjust that bit will go more deeper ?
If you can help me I using cabinet vision and unfortunately
I don’t have support from planit
When my cnc router cut sometime cutting bit don’t cut everything up to bottom
How I can adjust that bit will go more deeper ?
Hello, I do not have esupport from Planit.
Problem:
When I create a cut list to send to my cnc, the computer should subtract 1/32" from every part requiring laminate, and 1/16" for edgebanding on drawers & doors--- but its only subtracting 1/32" for edgebanding..
What parameters do I need to change within my material schedules/catalogs to fix this problem?
Please help me!! My boss wont pay for support!
Try asking at WoodWeb.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)