I tried loading several differnt stl files into BObcad 23 without success. They load ok in Meshcam and Cut3d. Does bobcad require something special in stl files?
Dan
Thread: Bobcad 23 doesn't load stl file
Results 1 to 2 of 2
-
11-08-2011, 04:40 PM #1
Registered
- Join Date
- Feb 2008
- Posts
- 243
Bobcad 23 doesn't load stl file
-
11-08-2011, 06:42 PM #2
Ghost
- Join Date
- Dec 2008
- Posts
- 4548
Nothing special required. If you run into this, you could try load the STL into MeshLab and then save as STL, then load it into BobCad.
Reply With QuoteSimilar Threads
-
FANUC Oi-M-->Backup SRAM and Load PMC file
By BKCOM in forum FanucReplies: 4Last Post: 07-12-2012, 08:34 AM -
Load a file as dripfeed
By cnc_swe in forum FanucReplies: 0Last Post: 12-06-2010, 11:13 PM -
G540: How do I load the mach3mill.xml file into Mach3?
By deemon328 in forum Automation Technology ProductsReplies: 6Last Post: 09-01-2010, 01:31 AM -
how to load stl file in to the current design M3
By vertix19 in forum MastercamReplies: 4Last Post: 05-14-2009, 11:18 AM -
how do i load xml file
By bullethead67 in forum Mach Software (ArtSoft software)Replies: 2Last Post: 10-28-2008, 04:07 AM
Posting Permissions
