[nice-day]

I have a problem with CNC Lathe Gildemeister NEF400 EPL, the G01 code doesn’t work, when the machine in a manual running mode G00 it works, but as soon as it moves to automatic mode G01 the spindle works but the cutting head doesn’t move (Z & X) stops totally, the machine operator did all the kind of program check everything looks fine, I’m attaching 2 pictures for the machine and the controller.

Machinetype CNC Lathe
Make GILDEMEISTER (Year 1983)
Type NEF400 (No. 68094)
167-30-0100 / 016

[TURNER]

I have a problem with CNC Lathe Gildemeister NEF400 EPL, the G01 code doesn’t work, when the machine in a manual running mode G00 it works, but as soon as it moves to automatic mode G01 the spindle works but the cutting head doesn’t move (Z & X) stops totally, the machine operator did all the kind of program check everything looks fine, I’m attaching 2 pictures for the machine and the controller.

Machinetype CNC Lathe
Make GILDEMEISTER (Year 1983)
Type NEF400 (No. 68094)
167-30-0100 / 016

Have you programmed a feedrate for example... G95 F0.20 The machine will not feed if a feed has not been programmed. I have not worked this machine but i have worked on other guildemeister lathes and after the machines are powered down and back up , spindle speed and feed rates have to be initialized.
Keith.