How would like my post to list a G02 and a G03 with each line? This is the code now.
N170 G1 Z2.36 F200.
N180 G41 D4 X2.178 Y-.7128 F14.06 (CUTTER COMP)
N190 G3 X1.9494 Y-.8075 I-.0669 J-.1616
N200 G2 X1.7493 Y-1.1799 I-1.9494 J.8075
N210 X1.5508 Y-1.2088 I-.1126 J.0767
N220 X1.2088 Y-1.5508 I-1.5508 J1.2088
N230 X1.1799 Y-1.7493 I-.1056 J-.0859
N240 X.4026 Y-2.0712 I-1.1799 J1.7493
N250 X.2418 Y-1.9513 I-.0257 J.1334
N260 X-.2418 I-.2418 J1.9513
N270 X-.4026 Y-2.0712 I-.1351 J.0135
This is where I think it needs to be changed
pcirout1 #Output to NC of circular interpolation
pcan1, pbld, pn, `sgfeed, sgplane, sgcode, sgabsinc, pccdia,
pxout, pyout, pzout, paout, pcout, parc, feed, strcantext, scoolant, pcccomment, pe
Thank You