i just bought a zenbot 2424 and i need help to engrave some plates for a couple of trophies, i order some collets and cutters already and i just need to know it is going to be hard? Please advice!!
i just bought a zenbot 2424 and i need help to engrave some plates for a couple of trophies, i order some collets and cutters already and i just need to know it is going to be hard? Please advice!!
Hi --
You might want to look at the Quick Start thread, which give some examples of engraving done with v-carve pro on a Zenbot 1216. Here is a link:
http://www.cnczone.com/forums/commer...t_notes-3.html
Message #12 is a "Quick Engrave" example done with a diamond drag bit on aluminium stock. Message #15 is an example of cutting colorcore lettering as a “profile” using the “one-line fonts” selection in the text dialogue.
Without knowing more about the spindle you are using and the type/sizes of tooling you have available it will be hard to offer specific advice.
HTH.
--Rich