584,812 active members*
5,395 visitors online*
Register for free
Login
Results 1 to 7 of 7
  1. #1
    Join Date
    May 2010
    Posts
    6

    Question Meldas L3 - Mitsubishi

    Hi everyone!

    We have a KNUTH CNC lathe with a mitsubisi meldas l3 controller in it.
    The last time when we turned on the machine the monitor was totaly dark.
    The controller and the monitor are under power, but nothing happens on the monitor.
    The machine worked fine but we used it just in February (10 months ago).

    I searched on the internet and the Maintenance Manual of the meldas l3 controller and we think the battery lost it's power and this cause the problem.
    (The manual: http://meau.com/Files/BNP-B3662.PDF)

    It happend once in the past when we bought the machine about 5-6 years ago and then a guy made it to work.
    But I can't find him

    It's my father's machine and he asked me to find a solution. But after a few days of searching everywhere I have no more idea.

    If someone have any information about this please help me out. It's very important.
    I'll be very obligated.

    Here is some plus information:

    TYPE FCAM3
    serial C3198690153

    Cards in it:
    MC 713/727
    MC 161-1
    MC 303

    Mem card:
    MC841


    Thank you.
    Tamas Matuz
    Hungary

  2. #2
    Join Date
    Oct 2005
    Posts
    672

  3. #3
    Join Date
    May 2010
    Posts
    6
    I checked that before you linked here, but I tought It won't work for us, because our monitor didn't work.
    After I read that again and I thougt to give it a try.
    And it worked.
    So Thank you very much it was a very big help.

  4. #4
    Join Date
    Oct 2005
    Posts
    672
    Good to hear. You can also replace the battery with any NiCad 3.6V unit, not necessary to get the one from Mitsubishi. I've used battery packs for cordless phones. :mrgreen: The replacement battery must be NiCad because the Mitsubishi charging circuits cannot handle a NiMh or lithium battery.

  5. #5
    Join Date
    May 2010
    Posts
    6
    I will tell it to my father. I did my job
    thanks to you.

  6. #6
    Join Date
    Jan 2007
    Posts
    11

    Re: Meldas L3 - Mitsubishi

    I have the same problem, some one could help me with the link or manual?

  7. #7
    Join Date
    May 2023
    Posts
    1

    Re: Meldas L3 - Mitsubishi

    Can someone help me with the MITSUBISHI CONTROL M325LG-V machine parameters AND THE EIA PROGRAMS AND TOOL DATA

Similar Threads

  1. Mitsubishi Meldas 300-V
    By firestaromega in forum Computers / Desktops / Networking
    Replies: 6
    Last Post: 10-03-2023, 08:00 AM
  2. Mitsubishi Meldas 300
    By hlabib in forum Mitsubishi controls
    Replies: 20
    Last Post: 04-20-2022, 05:19 PM
  3. Mitsubishi Meldas 60S
    By BKCOM in forum Mitsubishi controls
    Replies: 3
    Last Post: 11-28-2016, 03:59 PM
  4. Need help with Mitsubishi CNC MELDAS C64, will pay $1k
    By YesNoMayBe in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 03-22-2012, 06:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •