535,425 active members*
3,301 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Registered
    Join Date
    Dec 2011
    Posts
    0

    2dn LS overtravel

    Hi there.

    I have a problem with my Kitamura mycenter 1 with Fanuc control. I was checking the limit switches and touched one of them with a piece of metal and it activated, now I have an alarm 1011 overtravel (2d LS). I cant move any of the axes and neither get rid off the this alarm.

  2. #2
    Registered
    Join Date
    Feb 2012
    Posts
    0
    Im told that holding the 2nd ls switch overides the overlimit but it dosent work for me..... I manually turn the screw untill its off the switch and then re start the machine Ive done this several times with our kitamura mycenter1

    if the machine is not in overtravel and you acttivated the switch and it wont come out of lock even if you restart the switch is probably stuck so take the switch apart and find the problem
    take care
    JAK

  3. #3
    Registered
    Join Date
    Jan 2011
    Posts
    0
    Hi,
    I have the Troubleshooting for the Kitamura Mycenter HX400iF,May be the same as your machines. You can reference attachment.
    Attached Files Attached Files
    Aaron

  4. #4
    Registered
    Join Date
    Nov 2009
    Posts
    71
    Not sure how much you are familiar with Kitamura's apologies.

    The second limit remove switch should be held on to disable the second limit switch. Set the axis switch and move the axis with the handle be sure to set the increments to X10. Then remove the faulty switch and clean out the plunger. It’s pretty simple I had to clean both the X and Y axis switch on a Mycenter 1

  5. #5
    Dear Friends
    I need Parameter list for Kitamura Mycenter 3 with Fanuc 11m Control
    L. Sakthivel
    Email:info@premierengrs.com, website:www.premierengrs.com

  6. #6

    Join Date
    Apr 2020
    Posts
    2
    Quote Originally Posted by Eric MFG View Post
    Not sure how much you are familiar with Kitamura's apologies.

    The second limit remove switch should be held on to disable the second limit switch. Set the axis switch and move the axis with the handle be sure to set the increments to X10. Then remove the faulty switch and clean out the plunger. It’s pretty simple I had to clean both the X and Y axis switch on a Mycenter 1
    Not restart

Similar Threads

  1. G99 Overtravel
    By deere2210 in forum OneCNC
    Replies: 0
    Last Post: 12-24-2012, 06:41 PM
  2. Overtravel on G28
    By Dirty25RS in forum Fanuc
    Replies: 2
    Last Post: 02-17-2012, 09:28 PM
  3. 10T Overtravel
    By grease in forum Fanuc
    Replies: 22
    Last Post: 10-17-2007, 04:19 PM
  4. Help with Z overtravel
    By mbam in forum Fadal
    Replies: 6
    Last Post: 04-27-2007, 06:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •