Just bought this machine. from what I can tell everything works except the tool change routine. after doing a bit of research it appears the 9000 series programs were dumped somehow. along with everything else in the memory. does anyone have a copy of these programs? mine has the fanuc 18i control. your help would be greatly appreciated. thanks.
Results 1 to 3 of 3
-
12-02-2011, 01:13 PM #1
Registered
- Join Date
- May 2005
- Posts
- 394
NEED Cincinnatti Arrow 1500 O9000 programs
-
12-03-2011, 11:09 PM #2
Registered
- Join Date
- Apr 2004
- Posts
- 353
Probably a long shot, but I have the O9000 toolchange program for a Sabre 750 with Fanuc 0M control. Not sure if it'll be any use for your control?
-
12-04-2011, 12:33 AM #3
Registered
- Join Date
- May 2005
- Posts
- 394
something is better than nothing. are there any other 9000 series programs in your machine? thanks.
Reply With QuoteSimilar Threads
-
O9000 Tool Change Macro
By omkargupta in forum FanucReplies: 2Last Post: 09-17-2013, 01:00 PM -
Large CNC 1500 x 1500 x 2000 mm - any help ?
By KTM in forum European Club HouseReplies: 22Last Post: 09-10-2011, 08:10 AM -
Giant 5 Axis Cincinnatti Video
By Dan Falck in forum LinuxCNC (formerly EMC2)Replies: 3Last Post: 09-20-2008, 08:29 PM -
O9000 Tool Change Macro
By omkargupta in forum FanucReplies: 1Last Post: 09-10-2007, 10:41 PM
Posting Permissions
