584,866 active members*
5,228 visitors online*
Register for free
Login
Page 109 of 109 95999107108109
Results 2,161 to 2,171 of 2171
  1. #2161
    Join Date
    Dec 2005
    Posts
    313
    hi Uli,

    I can not find the link to this pdf on UHU Servo.
    Where is the link ?

    Vroemm.

  2. #2162
    Hi Vroemm,

    sorry, this link is not on the UHU home page yet. Will happen next days.

    Uli

  3. #2163
    Join Date
    Jan 2005
    Posts
    1943
    I have been browsing this thread and have some questions. First let me state my intention/desire. I have a small mill, right now it has a 1 hp spindle, but I am planning to add a treadmill motor for use as my spindle motor. I don't have the motor purchased yet, but the specs are 1.5 Hp continuous (1120 watts) @ 100 VDC. I would like to add an encoder to this motor to enable rigid tapping on my machine. Since this will be my spindle motor, I also want to have about 3000 motor rpm for use in machining operations. Since I would be adding the encoder, I could use any ppr count needed to achieve my goals.

    Is the UHU design servo controller capable of running that large a motor? In scanning through the thread it appears that the original design was flexible enough to handle it, but the new design appears to be limited to 50V. Is this correct?

  4. #2164
    Join Date
    Feb 2006
    Posts
    61

    Re: DIY Servo controller

    hi Uli;
    are the files for these servo drives still available?
    regards
    rasta

  5. #2165

    Re: DIY Servo controller

    Hi Rasta,
    yes, the controllers are still available. And so are blank PCBs.
    You can contact me directly: uli at uhu-servo.de

    Uli

  6. #2166
    Join Date
    Apr 2007
    Posts
    12

    Re: DIY Servo controller

    Quote Originally Posted by rasta View Post
    hi Uli;
    are the files for these servo drives still available?
    regards
    rasta
    Please look at page 108 .
    I'v got a mail from cnczone don't know Uli Huber hat one . Everything is still available .

    Long time i whas reading here .
    Iff you like to read/wright in German , although whe answer questions in Englisch visit CNCECKE but keep in mind the nativ lingo ok thanks .


    grtz from Belgium
    Potsy

  7. #2167
    Join Date
    Apr 2007
    Posts
    12

    Re: DIY Servo controller

    Uli hat the mail also hi uli

  8. #2168
    Join Date
    Aug 2006
    Posts
    2758

    Re: DIY Servo controller

    Hello everyone!!
    I am back after more than 10 years absent.
    Best regards to all of you!!
    kreutz

  9. #2169
    Join Date
    May 2006
    Posts
    47

    Re: DIY Servo controller

    Hi Kreutz,
    I am glad to see you here again !
    Regards,
    Emil
    http://www.bg-cnc.com/wordpress/
    http://www.dailycnc.eu/

  10. #2170
    Join Date
    Aug 2006
    Posts
    2758

    Re: DIY Servo controller

    Hello Emil;

    Long time, isn't it? I hope everybody is well and making chips. I would like to know how the HPUHU drives are doing, if still working.
    Also to know about those participants in this thread that are still around in the cnczone.
    Best regards.
    kreutz

  11. #2171
    Join Date
    Aug 2022
    Posts
    1

    Re: DIY Servo controller

    Heatscape was established in 1999 with the goal of providing advanced thermal engineering and design services to customers in Silicon Valley with increasing thermal and mechanical challenges. For the past 15+ years, Heatscape has grown from that small consulting firm with local reach to a global engineering and manufacturing solutions company with the ability to support our customers worldwide. We are Available for call 9:30am – 5pm. and reachable through emails 24/7.

    https://www.heatscape.com/

Page 109 of 109 95999107108109

Similar Threads

  1. Central PID Controller vs. PIV Controller in each Servo Amp
    By Bronx68 in forum CNC Machine Related Electronics
    Replies: 12
    Last Post: 11-20-2013, 05:33 PM
  2. Servo Controller pin out ?????
    By slowtwitch in forum Servo Motors / Drives
    Replies: 0
    Last Post: 05-28-2013, 03:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •