I was experimenting today with text that is both raised and V-cut.
It came out pretty good I think.
I first of all created the V-cut text file without the raised text.
Then I added the raised text to the banner.
I then cut piece out with 1/8 inch tapered ballnose bit with a stepover of 0.005 inch.
I switched to a 45 degree V-bit cut into the raised text...
After a light sanding it left a raised hallo around the V-carved text.
This should make a nice Christmas welcome in our front door!
Results 1 to 5 of 5
-
12-11-2011, 12:45 AM #1
Registered
- Join Date
- Sep 2005
- Posts
- 116
Text that is both raised and V-cut
-
12-11-2011, 08:51 PM #2
Member
- Join Date
- Sep 2011
- Posts
- 1183
Looks real good which Vetric program did you use?
-
12-25-2011, 05:05 AM #3
Registered
- Join Date
- Sep 2005
- Posts
- 116
Aspire!
Originally Posted by LouF
-
12-25-2011, 05:40 AM #4
Member
- Join Date
- Sep 2011
- Posts
- 1183
Thanks it will be some time before I can purchase that I have Cut2D and saving for VCarve Pro..
-
12-25-2011, 06:17 AM #5
Registered
- Join Date
- Sep 2005
- Posts
- 116
Save your pennies, because it's worth everyone of them! Originally Posted by LouF
Reply With QuoteSimilar Threads
-
How to draw a raised ellipse? 2D?
By Fastest1 in forum BobCad-CamReplies: 28Last Post: 07-31-2011, 04:04 AM -
Raised lettering, How ???
By Mr. LocoMartin in forum BobCad-CamReplies: 4Last Post: 03-29-2008, 07:10 PM -
Raised Text
By roland88 in forum Uncategorised CAM DiscussionReplies: 10Last Post: 11-19-2007, 10:35 AM -
Raised Letters
By Astroguy in forum Mach MillReplies: 1Last Post: 09-12-2007, 01:42 AM -
raised letters
By zcases in forum OneCNCReplies: 1Last Post: 01-13-2007, 06:53 PM
Posting Permissions
