[ceramdent]

I have a question please if someone can answer me ?
when I calculate with tolerance like in photo 1 the machine work in good feed speed , but when I calculate with small tolerance how I need like in photo 2 machine work slowly.My machine is Almac fc1105 ge Fanuc series 16i-M.
Question: have any option in Fanuc control to resolve this problem,to speed up the machine working feed?.

[ALEXCOMO]

g8 pi? look ahead
g5.1 q1? AI
or arc line approx in cam,
if no one good you have to play with parameter(1800 to 1900 approx)

[ceramdent]

hello thank you very much for answering in my question,
when I try G05.1Q1 it shows this alarm-
Alarm 5111 IMPROPER MODAL G-CODE (G05.1Q1)

when I try G8P1 work, but more slowly than without G8P1

[ALEXCOMO]

For g5.1 chek a Fanuc manual,because I dont' have 16i control.
For g8 p1 I use first a macro going to regulate axis parameter from high precision to high speed I can post to you privately but is own your risk because it's work on Oimc

[ceramdent]

Ok Alexcomo please if you can post it ?