Hi, our shop got a new mill with an Anilam 3300MK controller, after looking for a suitable post for it , I found it in an old version of Mastercam V9 disc that we had laying around, we're using X4 now, so I did the updatepost thingy with it, the code works ok except that it does not outpost the M codes, not spindle nor coolant, looking at the post I know that the code is there but somehow is not activated, I have been playing with a copy of the post trying to solve this dilema , but so far no good, any ideas how this could be fixed ?, the post is MPAN113X form V9, Here are copies from both post V9 and X4, if someone have any sugestion it'll be really apreciated.
Thank in advance.
Saludos
Jesus