502,789 active members
3,933 visitors online
Register for free
Login
IndustryArena Forum > Other Machines > Engraving Machines > Dead wizzard DT - transplant help
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    Jan 2009
    Posts
    2

    Dead wizzard DT - transplant help

    Hi folks
    I have a a wizzard DT (Suregrave) which after many years of sterling service has rolled over with a failed logic board. Sadly Suregrave tell they have no more replacement logic boards.
    So since the rest of the unit is fine and built like battleship I was wondering about buying one of these chinese 3 axis logic boards to resurrect the beast.
    Problem is I think the Z stepper is a different rating from the X-Y does anybody know this is feasible or do just need to tow it out to sea and open the seacocks?

  2. #2
    Registered
    Join Date
    Mar 2007
    Posts
    1910
    Hi skelfie


    without knowing any details of your motors or stepper drivers
    I cannot be 100% sure if a chinese board can be made to work

    if the switches on the chinese board cannot give you the required current
    for the three motors ,
    you could possibly change the current sense resistors

    but look here first ---http://www.cnczone.com/forums/general_electronics_discussion/110986-how_i_fixed_my_chinese.html

    people have had mixed results with chinese boards

    I would prefere to use a breakout board and separate drivers

    John

  3. #3
    Registered
    Join Date
    Jan 2009
    Posts
    2
    Thanks for that John, I'm going to try and find the spec of the stepper motors and take it from there

    cheers

  4. #4
    Neuer Benutzer
    Join Date
    Feb 2013
    Posts
    0
    What was the outcome of your repair to the Wizzard. In the US we have a very good repair shop for Dahlgren/Suregrave.

    www dot ltdengraving dot com Home

  5. #5

    Re: Dead wizzard DT - transplant help

    Well it's now six years later and I have finally got round to resurrecting the Old Wizzard DT, with cheap controllers off ebay.
    It's been so long I've lost my original Skelfie account so I just created a new account to save time.
    Had to build PC with a parallel port using bits from the spare part bin, but it's whizzing along nicely using LinuxCNC.
    Next job is build a case for all the gubbins so it doesn't look so much like an IED
    I've been using a Roland MPX-80 in the mean time, but as it's down to it's last couple of pins I decided to finally get the the old Frankenstein box back in action
    It nice having the old beast back in play

Similar Threads

  1. Series 1 BOSS 5 X Axis Dead, still dead after new transistors
    By keebler303 in forum Bridgeport / Hardinge Mills
    Replies: 3
    Last Post: 02-01-2014, 04:27 PM
  2. Dahlgren Wizzard DT software
    By Black pig in forum Engraving Machines
    Replies: 0
    Last Post: 11-11-2013, 10:10 PM
  3. Old Dahlgren Wizzard XL
    By Popeye in forum Engraving Machines
    Replies: 0
    Last Post: 04-19-2011, 04:42 PM
  4. code wizzard Siemens
    By BDsaint in forum EdgeCam
    Replies: 6
    Last Post: 11-10-2010, 06:45 PM
  5. Modelling a Guitar for a Variax transplant
    By nshack31 in forum Autodesk
    Replies: 1
    Last Post: 03-17-2006, 04:24 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •