Hi All,
Can someone tell me if it is possible to connect a linear scale to a CNC system with Mitsubishi FX3GA-60MT controller and a GS2110-WTBD HMI.
If not, what would be the easiest way to keep track of the position of the spindle on the given Axis
TIA
Tom
Results 1 to 1 of 1
-
01-07-2021, 11:02 AM #1
- Join Date
- Aug 2020
- Posts
- 12
Mitsubishi FX3GA-60MT and positioning
Reply With QuoteSimilar Threads
-
positioning problems
By mohsen7 in forum DIY CNC Router Table MachinesReplies: 2Last Post: 01-21-2019, 01:05 PM -
Mitsubishi 300V Turning Center (Mitsubishi MTC10B Machine)
By shaktiwan in forum Mitsubishi controlsReplies: 0Last Post: 07-08-2018, 06:09 AM -
320 Positioning Error
By elogicca in forum Gecko DrivesReplies: 2Last Post: 07-08-2008, 05:33 PM -
Need help with motorized positioning
By xshaper in forum Work Fixtures / Hold-Down SolutionsReplies: 6Last Post: 11-26-2007, 12:38 AM -
*** Positioning Problem ***
By baran3 in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 01-24-2007, 02:25 AM
Tags for this Thread
Posting Permissions
