584,837 active members*
4,895 visitors online*
Register for free
Login
Results 1 to 7 of 7
  1. #1
    Join Date
    May 2003
    Posts
    323

    Leadwell tdc 450 310m

    Please help reload proper parameters

    Back up battery died.

    Getting S02 init parameter error 2e
    spindle controller al37

    Does any one have parameters saved

    I have called leadwell and mitsubishi and still same alarm.


    Thanks

  2. #2
    Join Date
    Feb 2016
    Posts
    6

    Re: Leadwell tdc 450 310m

    Did you ever get the parameters? I have the same problem. If you did can you share them with me. Thanks.

  3. #3
    Join Date
    May 2003
    Posts
    323

    Re: Leadwell tdc 450 310m

    Found some parameters not sure if they work i could not get the magazine to work. Tapatalk Cloud - Downlaoad File TDC-450%20PARMATERS.pdf

  4. #4
    Join Date
    Feb 2008
    Posts
    12
    We have the same problem. Parameters is filled after battery change and charge, but macro for tool change is still missing. I can make images of params list, if anyone need it. Waitings for any information from Leadwell, because I contacted him. Another trouble is with drives, first fifteen minutes works fine, after it produce noise caused by unstability of drives..I have not any idea, what it is..

  5. #5

    Re: Leadwell tdc 450 310m

    I have LEADWELL TDC 450 Drill Tape Center CNC machine with Meldas 310 and i have issue of tool call i have Macro program in controller and it get call when tool command is give but Error alarm occurs on screen No program no , so please help me so can get ride out off this please

  6. #6

    Re: Leadwell tdc 450 310m

    Dear i have TDC 450 Leadwell Drill Tape Center cnc and have problem with ATC Macro program and parameters setting for Tool Pot and so while calling Tool no it gives Alarm no program no while reading Macro program 9001 so please help me

  7. #7

    Re: Leadwell tdc 450 310m

    Also can some one help me with original parameters for Lead Well TDC450 CNC Machine it will be helping hand for me

Similar Threads

  1. Leadwell VMC-OP
    By CS900 in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 03-29-2013, 10:50 PM
  2. Leadwell MCV-550
    By Ergoplus in forum Spanish
    Replies: 1
    Last Post: 10-01-2012, 07:38 AM
  3. help with Leadwell MCV-OP
    By prec-tech in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 06-13-2011, 06:34 AM
  4. Leadwell v-40
    By gaza2 in forum Vertical Mill, Lathe Project Log
    Replies: 0
    Last Post: 02-12-2011, 03:52 AM
  5. Leadwell VMC??????
    By Fudd in forum Uncategorised MetalWorking Machines
    Replies: 6
    Last Post: 02-14-2007, 03:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •