I am looking for a Dyna Myte DM3000 and a 2800 mill. Working machines or parts machines considered. Any leads appreciated.
Thanks!!
I am looking for a Dyna Myte DM3000 and a 2800 mill. Working machines or parts machines considered. Any leads appreciated.
Thanks!!
I have a Dyna myte 3000 lathe. It needs work. Some one blew out the control messing with the x axis resolver. It has a very heavy table with it. I can send pictures. It has been sitting a long time so there is stains on the ways. I will take 750.00 for it where is as is. I don't think it has ever been run. The machine with table I am guessing weighs 1500 pounds. I am in Eden Utah.
Where are you located?
Timothy
Dyna Mechtronics DM4400, Bridgeport Discovery 300, HAAS VF-0E, HAAS VF-2D
BobCad 16, 20, 24 and now V25
I am in Eden Utah. The machine with table weight i am guessing is 1500 lbs.
I have a Dynamyte 2800 for sale.
We got it in with no history, and spent a while to get it running.
It has an onboard PC running DOS and a proprietary 4M Program. The PC was in bad shape; it wouldn't boot properly. The hard drive it came with was failing, and after cloning it to a new drive the computer booted properly.
It worked flawlessly the first times it turned on. We saw all the motors were functioning properly including the spindle. After a day or so it began to throw back error codes.
I have since been unable to give any attention to it, but I am sure it's just a silly electrical short away from being a fully functional CNC mill.
On a side note, I was hanging on to this machine because I believe it would be an excellent candidate to retrofit to LinuxCNC or a similar application.
You can get back to me at vittorio.alfieri [at] alpha-logix.com
EDIT: I am in Brownsville, Tx
I am also looking for a DYNA Myte 2800 if anybody knows of someone that has one that is a needing a retrofit. [email protected]
Hello, just joined.. I know I am responding to an old post but I purchased a dyna myte 3000 cnc lathe a few years ago and hope to learn more about it..anyone running one of these with the original controls?
I may also be interested in selling.. It is in excellent shape, and works great.