[ceramdent]

hello my friends
I see that only ideal option for my work is fanuc g5 function , I see in my machine manual G5 function existing . but when I write in MDI g05 p10000; it show alarm 010 improper g code,in fanuc manual write this-(If a G code other than G05 P0 is specified in high–speed linear interpolation mode, P/S alarm No. 010 is issued).please if you can help me to activate g5 function in my machine you will help me to much. my machine is Almac FC 1105,control fanuc 16i-M.
thank you in advance .
best regards

[bertus.nl]

HI

For me G05.1 Q1 works for on and G05.1 Q0 for off

THE PLACE WHERE YOU PUT IT IN THE PROGRAM MAKES A DIFFERENCE TO!!

VR GR BERTUS

[fordav11]

G05 is an option. the alarm means you don't have the option on your machine.
This is normally a paid option.
The information on how to enable it yourself can't be put here on this forum publicly
See this for why.....
http://www.cnczone.com/forums/fanuc/...ary_posts.html