If you are posting to get assistance, it would be very helpful to show us what you are needing. All to often I see requests for help that are described but don't have any photo to refer to. That's a mistake! I do my best to figure out what would help but have to throw in the towel due too scant info.
Please post a photo of your project when asking for assistance.
Joe Crumley
Norman Sign Company, Norman, Oklahoma, SandBlasted Signs, Sign Painter, Redwood Signs
Thread: Helping with questions
Results 1 to 2 of 2
Hybrid View
-
01-03-2012, 11:37 PM #1
Registered
- Join Date
- May 2006
- Posts
- 202
Helping with questions
-
01-28-2012, 02:25 AM #2
Registered
- Join Date
- Jul 2009
- Posts
- 272
Good point Joe.
Better info you give us better we will be equipped to help,Thank you for your support in developing better cnc experiance.
Scan my avatar with smart pnone ...... http://www.big-tex.tk/
Reply With QuoteSimilar Threads
-
Need helping figuring out CNC issue
By Eddieman in forum DIY CNC Router Table MachinesReplies: 3Last Post: 03-10-2011, 07:02 AM -
Who are you actually helping?
By underthetire in forum Safety ZoneReplies: 6Last Post: 07-06-2010, 01:03 AM -
Helping my husband:)
By pmelrose in forum MetalWork DiscussionReplies: 4Last Post: 12-12-2009, 06:48 PM -
looking for someone helping for drawing plans. will pay
By draftdodger in forum Mechanical Calculations/Engineering DesignReplies: 2Last Post: 09-02-2009, 03:41 PM -
(Newbie) Need helping wiring up my boards:)
By mike3385 in forum Stepper Motors / DrivesReplies: 0Last Post: 08-31-2009, 10:24 PM
Posting Permissions
