[andrewipm]

Hi Everyone
I have a problem with Index gs 30 4 axes for a long time stopped and don't know if defective,at restart of the machine the monitor don't display any message(blank),all led's of interface are light,the plc are restarted and the led on the link module are light .
I have a dubt about the module on the rack( 1 slot are empty but i don't know if only miss a cover)
Anyone can help me

[deltam]

Hi andrewipm
I have the same problem.If you solve this problem please tell mi how.
In my case i change the battery (3.6V three).then i reset the plc and than with pressing and holding first tree soft key and main menu key press nc1Now i have screen but i stopped here.I don't now how to recomission the mashine. Do you have any documentation of machine?I have only two book
My machine is INDEX GS30-4 whith C200 controll Sinumerik 3tt.

[hadi1984]

Hi andrewipm
I have the same problem.If you solve this problem please tell mi how.
In my case i change the battery (3.6V three).then i reset the plc and than with pressing and holding first tree soft key and main menu key press nc1Now i have screen but i stopped here.I don't now how to recomission the mashine. Do you have any documentation of machine?I have only two book
My machine is INDEX GS30-4 whith C200 controll Sinumerik 3tt.

Hi dear
i have same problem too
i have INDEX GL200 with C200 sinumerik 3tt .
i change the battery and now the display dont show anything ( Blank )
can you tell me how can i solve this ?
which 3 keys must to be pushed

thanks

[amirebrahim1]

Hi

I can solve this problem but i am persian iran and i can not good english.

Thanks. [email protected]