[Memran]

I currently have 3 of 57BYGH728 (one of them is double shaft B-variation) stepper motors, but I do not have the datasheet.

I trawled the internet (found other 57BYGH motors but not the 728 or 728B), and also asked the supplier I got them from, but no luck.

So do any of you guys have the datasheet?

Thanks

[toshtiger]

hi,

not sure if you have found the info you need, but i use 3 of those motors one one of my machines, sure i have the motor info somewhere in the workshop. should be able to work out the wiring from my 4-axis driver board.

cheers

tony

[Memran]

Many thanks, however there is no need now. I've managed to find my datasheets.

[TobyTetzi123]

Many thanks, however there is no need now. I've managed to find my datasheets.

Hello,verry old Thread, but I search this Datasheet too.

Regards Toby

[Memran]

I had to hunt around for this, but I found it in my archives

https://www.dropbox.com/s/6db8bpn0cj...GH728.pdf?dl=1

Enjoy!

[svin]

I had to hunt around for this, but I found it in my archives

https://www.dropbox.com/s/6db8bpn0cj...GH728.pdf?dl=1

Enjoy!

Any chance I can get that info? Need to know voltage and wireing.

[Memran]

Hello svin,

Sorry for the slow reply, it took me a while to find the datasheet again, since I stopped using dropbox a few years ago.

Try this link from google drive:
https://drive.google.com/open?id=1Y6...fjA1a5dhNJ-u2T

Hope that helps