I'm looking at adding a hydraulic chuck to my GT-20, but I need it to have a larger capacity than what Haas offers. We need to accommodate 2.25" bar stock (Haas's option has a 2.06" capacity).
I've been able to source a rotating cylinder, but I'm not sure what the criteria for the hydraulic power unit is.
Does anyone have the Haas option on their GT-20? I've been looking for info on the power unit (I think they were Parker or Rexroth) or even some pictures, but I haven't had any luck with Google. I would really appreciate a part number or some pictures of an installed unit.
Thread: Hydraulic power unit for GT-20.
Results 1 to 2 of 2
-
01-09-2012, 06:36 AM #1
Registered
- Join Date
- Sep 2004
- Posts
- 209
Hydraulic power unit for GT-20.
-
01-09-2012, 09:44 PM #2
Registered
- Join Date
- Aug 2011
- Posts
- 0
Haas automation uses both Parker and Rexroth units and the part number stays the same for either. The part # for the Hydraulic Power Unit is 30-8070.
Good luck,
Reply With QuoteSimilar Threads
-
Power Supply Unit
By kolias in forum CNC Machine Related ElectronicsReplies: 7Last Post: 01-13-2011, 02:31 AM -
Need help with the power unit
By zenon564 in forum CNC Machine Related ElectronicsReplies: 11Last Post: 05-27-2010, 03:54 PM -
Omron PLC I/O power unit
By agustinus.jusup in forum CNC Machine Related ElectronicsReplies: 2Last Post: 09-14-2008, 06:40 AM -
Hydraulic vs Direct mechanical power transmission?
By DennisCNC in forum Mechanical Calculations/Engineering DesignReplies: 3Last Post: 06-29-2007, 01:59 AM
Posting Permissions
