584,879 active members*
5,145 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2009
    Posts
    419

    6 hour Q&D dual finishing system

    First small setup for my vibratory finisher is working:

    vibratoryfinish.mpeg - YouTube
    Sven
    http://www.puresven.com/?q=building-cnc-router

  2. #2
    Join Date
    Jul 2009
    Posts
    419

    Re: 6 hour Q&D dual finishing system

    Few years on, system is being used for production, a few days per year.

    Has been encased in 35 mm osb case to keep noise in. Motor is on the outside of the case and can be removed/disconnected in 2 seconds. Reconnecting takes 30 seconds.

    Tub holds 30 kilo's of 3 mm and 2.8 mm stainless balls.
    Sven
    http://www.puresven.com/?q=building-cnc-router

Similar Threads

  1. Dual Saw Portable Track System
    By infomatrix in forum Metalworking- / Woodworking Tooling / Manual Machining
    Replies: 0
    Last Post: 07-18-2013, 07:47 AM
  2. Dual Steppers or Timing Belt for Dual X-axis?
    By GEBrown in forum Linear and Rotary Motion
    Replies: 3
    Last Post: 05-27-2010, 05:45 PM
  3. Dual Z axis and Dual Spindle
    By Adamj12b in forum Mach Software (ArtSoft software)
    Replies: 3
    Last Post: 08-28-2008, 09:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •