First small setup for my vibratory finisher is working:
vibratoryfinish.mpeg - YouTube
First small setup for my vibratory finisher is working:
vibratoryfinish.mpeg - YouTube
Sven
http://www.puresven.com/?q=building-cnc-router
Few years on, system is being used for production, a few days per year.
Has been encased in 35 mm osb case to keep noise in. Motor is on the outside of the case and can be removed/disconnected in 2 seconds. Reconnecting takes 30 seconds.
Tub holds 30 kilo's of 3 mm and 2.8 mm stainless balls.
Sven
http://www.puresven.com/?q=building-cnc-router