584,861 active members*
4,717 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2005
    Posts
    2

    Exclamation Cutting condition.... please !!!!

    Good evening!!

    I work on a leading laser, NTC TLN 510 3000 watts with an ossilateur and controleur FANUC. What I look for is conditions of cut for metals, Steel, stailess steel, 16 Gauge in 1/2 thickness and aluminium 1/8 at 1/4. I am one new small operator and I would want a base with it is given it is the file which it names ;CUT.DAT.... THANK YOU FOR YOUR HELP

    MY EMAIL: [email protected]
    or
    [email protected]

  2. #2
    Join Date
    Nov 2005
    Posts
    2
    My image controleur bord FANUC
    Attached Files Attached Files

  3. #3
    Join Date
    Jan 2004
    Posts
    231
    I think there are not a lot of readers on this forum that use lasers at power level that your laser has. I'm told that this is a good book and may answer your questions:

    Co2 Laser Cutting
    ISBN: 1852330473
    by John Powell

    you also may get some information at this site:

    http://www.synrad.com/Applications/archives.htm



    owen

  4. #4
    Join Date
    Oct 2005
    Posts
    6
    I program a 3300W laser. We cut mostly high carbon steel up to 0.035" but also some 0.250 and thicker mild steel.

    I'm not sure what you are asking for or what your cut libraries are like but I could give you some basic info.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •